Japanese KAKURI brass bar clamps for fine and precise clamping, fitting and glueing small scale work. 150mm : Bar dimension : 150mm x 4mm x 4mm Clamping width : 125mm Clamping depth : 13mm Weight : 46g 180mm : Bar dimension : 180mm x 4mm x 4mm Clamping width : 155mm Clamping depth : 13mm Weight : 50g 240mm : Bar dimension : 240m

Japanese KAKURI brass bar clamps for fine and precise clamping, fitting and glueing small scale work. 

150 mm :
Bar dimension : 150 mm x 4 mm x 4 mm
Clamping width : 125 mm
Clamping depth : 13 mm
Weight : 46g

180 mm :
Bar dimension : 180 mm x 4 mm x 4 mm
Clamping width : 155 mm
Clamping depth : 13 mm
Weight : 50g

240 mm :
Bar dimension : 240 mm x 5 mm x 5 mm
Clamping width : 215 mm
Clamping depth : 14 mm
Weight : 90g

300 mm :
Bar dimension : 300 mm x 5 mm x 5 mm
Clamping width : 275 mm
Clamping depth : 14 mm
Weight : 105g

Shinwa layout square miter ruler 62113 for
45 and 90 degrees angles.

Well deep-etched readable graduation on both sides.

Size : 168 mm x 73 mm x 63 mm
Weight : about 100 grams

Made of aluminum, light and durable. 

Made in Japan.

Shinto 250 mm wood sawrasp E2101.

Total length : 390 mm (15.4)
Wide : 3 cm (1.2)
Weight : 230 grams

The rasp has 2 sides with different grits, one medium and one coarse :
- Coarse side : 10 ppi (teeth per inch)
- Medium side : 24 ppi (teeth per inch)

Thanks to their grid shape, they offer high efficiency and no fouling. 

Non-slipping elastomer handle for an easy and comfortable gripping.

Can be used for lumbers, ply wood, laminated ply wood, plastic, plaster boards, leather, iron, copper, aluminum, lead

Made in Japan.

Set of 11 Japanese SENKICHI wood chisels.

They are very well balanced, with a Red Oak handle and an iron hoop at the end.

The blade is made of Hitachi Yasugi Steel.

Size : 3 mm, 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 21 mm, 24 mm, 30 mm, 36 mm, 42 mm.

Chisels are about 23 cm long (9).

  3 mm : 85 grams
  6 mm : 90 grams
  9 mm : 110 grams
12 mm : 120 grams
15 mm : 130 grams
18 mm : 140 grams
21 mm : 150 grams
24 mm : 170 grams
30 mm : 185 grams
36 mm : 210 grams
42 mm : 240 grams

Made in Japan.

Japanese Fujiwara Sangyo Umebachi Ryūma convex compass plane. 
Those 2 spoon bottom convex wood planes are suitable for hollowing curved and concave surfaces.

Sori-Dai-Kanna :
24 mm straight bladed convex compass plane with a sole curved along the length. (used for smoothing concave edges). The edge of the 24 mm blade is straight. (cutting width is 20 mm)

Shiho-Sori-Dai-Kanna :
24 mm curved bladed convex compass plane with a sole curved both in its length and width. (it can be used for example to round the inside of large wooden bowls). The edge of the 24 mm blade is rounded.

Size of both compass : 120 mm x 38 mm x 35 mm (including the blade). (4.7 x 1.5 x 1.4)
Weight : about 110 grams
The blade is 24 mm wide and 4 mm thick.

Made in Japan.

Made in Japan.

High quality japanese Dozuki saw 370 Razorsaw Gyokucho 240 mm + 1 spare blade

Blade length : 240 mm (9.4)
Overall length : 600 mm (23.6)
Blade thickness : 0,3 mm 
Kerf : 0,46 mm
Pitch : 1 mm
Cutting range : 55 mm deep
Weight : 220 grams

Hard impulse-treated teeth, heated briefly and shockingly cooled to obtain a very hard blade. 
Ideal for cutting dovetails and tenons. Cross cut blade.

Excellent durability.

Wood handle wrapped with rattan.

Spare blades are also available, or save money and order this saw directly with its spare blade.

Made in Japan.

Set of 9 Japanese Tōgyū oire nomi wood chisels.
Laminated carbon steel.

Size : 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 21 mm, 24 mm, 30 mm, 36 mm

Chisels are about 23 cm long (9).

  6 mm : 90 grams
  9 mm : 100 grams
12 mm : 110 grams
15 mm : 130 grams
18 mm : 135 grams
21 mm : 150 grams
24 mm : 170 grams
30 mm : 190 grams
36 mm : 210 grams

They are very well balanced, with an iron hoop at the end.

Made in Japan.

Japanese Kiridashi Kogatana Shōzō wood-bamboo chisel marking carving knife.
Hand-forged by japanese blacksmith craftsman.

Size : 15 mm
Length of the blade : about 17 cm
Blade thickness : about 2 mm
Weight : about 42 grams

Blade is made of blue steel Aogami II with hammer eyes.

Made in Japan.

King chisel whetstones :
#1000 + #4000

For an optimal result, I recommend the 2 grains of stones. With the large and the small stones, you should be able to sharpen almost any shape of chisel.

Size of the main stone :
107 mm x 65 mm x 15 mm (4.2 x 2.6 x 0.6)
Weight : 220 grams

Size of the small stone :
65 mm x 33 mm x 9 mm (2.6 x 1.3 x 0.4)
Weight : 25 grams

Made in Japan.

Set of 6 Japanese hand forged SENKICHI Oirenomi wood chisels.

They are very well balanced, with a Red Oak handle and an iron hoop at the end.

The blade is made from laminated Hitachi Yasugi No.2 White paper Steel.

Size : 6 mm, 9 mm, 12 mm, 18 mm, 24 mm, 30 mm.

Chisels are about 23 cm long (9).

  6 mm : 90 grams
  9 mm : 100 grams
12 mm : 110 grams
18 mm : 140 grams
24 mm : 160 grams
30 mm : 180 grams

Made in Japan.

Toribe scissors KS203 for the kitchen and household.
You can cut herbs salads, spices, thin bones, fish. but also carton, paper, thin leather.
Those scissors are very sharp and made of hardened stainless steel.

Size : 200 mm long (7.9) and 75 mm wide (3)
Weight : 115 grams

The 2 blades can be easily and quickly separated just by openening the scissors at 110°. Disconnect the 2 blades for an easy cleaning but also an easy sharpening.

Made in Japan.

Original japanese NAGAO higonokami friction folding pocket knives.

Blade : Bluesteel
Handle : Brass 

This set includes 3 knives :
120 mm, 98 mm and 54 mm (length of the handle)

120 mm :
Length of the blade : 93 mm (3.7)
Length of the handle : 120 mm (4.7)
Blade thickness : 3 mm
Weight : 70 grams

98 mm :
Length of the blade : 75 mm (3)
Length of the handle : 98 mm (3.9)
Blade thickness : 2,5 mm
Weight : 50 grams

54 mm :
Length of the blade : 33 mm (1.3)
Length of the handle : 54 mm (2.1)
Blade thickness : 2 mm
Weight : 15 grams

Knives are double-edged.
Those knives are handmade so they may look a little bit different, and also the size can vary a little bit.

Made in Japan.

Topman Japanese Hatagane Brass Clamp - 300mm

SUJECIÓN

Brass Clamp

HATAGANE Japanse bar clamps. This traditional clamps tool is ideal for fixing or gluing wood material.

KAKURI Bar Clamps for Woodworking 10-1/2 HATAGANE Japanese Wood Clamps, Metal Parallel Clamps Tool Set 2 Pcs, Brass Gold, Made in JAPAN

Japanese Bar Clamps, Hatagane Clamps

Shogun Japan Hatagane Brass Clamp - 150, 240 or 360 – ProTooling

Topman Japanese Hatagane Brass Clamp - 300mm

Brass Clamp

Topman Japanese Hatagane Brass Clamp - 300mm

KAKURI Hatagane Brass bar clamps clamp made in Japan - Osaka Tools